Time to seal up the right tank! My goal tonight was to get this right tank completed and curing so I can do a final leak test on it. I underestimated how much work the baffle would be to be honest. You can’t really stop mid-way once you start on … Continue reading
I had some more parts arrive yesterday for the build. The 8/32 x 1/2″ socket head stainless screws that I’ll use for the access plates and float senders. I’ve heard these screws make it MUCH easier to remove and install the access plate, as compared to the stock phillips head … Continue reading
Knocked out a bunch of little tasks on the right fuel tank tonight. I received my Van’s order which contained all the parts and fittings I needed to install the fuel return line. I decided to go with -6 line instead of the -4 I had originally planned, thankfully I … Continue reading
I managed to get down to the shop to do a little bit of work. This was a short session, but I knocked out some needed things to get done. I did manage to capture it on a timelapse, so heres that short video: Now that the sealant was cured … Continue reading
Its time to get the outboard rib sealed in place and start working on the capacitive sender for the right tank. This was a pretty long work session, but it went pretty easy. I started out by pulling out the plans and instruction for the capacitive sender. I picked up … Continue reading