https://www.turtleopticians.com/eye-exams/ I found an hour or so to finish up the main wing rib fluting. Like the last session, I used the table top method on our granite countertop and knocked out the remaining 14-something main wing ribs. They stack much nicer now that they are all formed straight and with proper flanges.
source linkOrder Alprazolam I was going to start working on the leading edge ribs, but decided to hold off on those guys, because I think I will modify my flange straightener tool to work with these curved edges so I can more easily get the flanges to 90 degrees. Then I can flute them all. No photos from tonights work, as it is pretty much the same as the last session.
follow link Hours Worked:1.25
https://tuf-top.com/frequently-asked-questions/ Lynn, I saw your reply to my post about my ACK-04 ELT going off on it’s own. I thought I had solved the issue, but it happened to me again today. Could you drop me an email and let me know if you resolved your issue in your 172?
https://spareveil.com/foot-massage/Thanks.
Tom
N74TL
Van’s RV7A flying since Nov ’16
Clonazepam For Sale Online Hey Tom! Sure thing! I’ll email you in a bit.