Tag Archives: Aileron Alignment Jig

Installing Aileron Pushrods and Aligning the Ailerons

By | | , ,
Leave a comment

Another good milestone tonight! The ailerons have their pushrods installed and they are set to neutral position and aligned.  Things are wrapping up quickly.  I captured two time lapses of the work tonight. I started out by removing all of the masking tape from the W-818 pushrods.  The primer has … Continue reading →

Making the Aileron Alignment Jig

By | | , ,
Leave a comment

After a short break, I came back down to the shop to get the alignment jig made.  I’ve ready a few ways of doing this, but honestly, Vans has the most simple way of doing it and its worked for countless other builders, so I decided to stick with convention … Continue reading →