see url Time to finish up the leading edges….almost. You see, I realized I made a mistake and back drilled the W-408 ribs too close to the flange bend, and they’ll need replaced. It happens :-/ But, I did manage to get the right leading edge mounted on the wing. This is … Continue reading Cheap Xanax For Sale →
source site
click I wanted to knock something out tonight since it’s been a while since I last worked on the plane. So, I figured it was time to finish the stall warner. I had alodined all the parts to it previously, to help prevent corrosion, but I did not get any photos. … Continue reading
https://serenitycareandcompassion.com/h9hmltik41
https://genevaways.com/lm17thpe9u I decided to tackle some small things tonight – The stall warner. I have been looking forward to this for a while now, because it looks a bit intricate (a nice break from the monotony of the wings!), and includes a little electrical work. The first step was to open … Continue reading
Buy Zolpidem 5Mg
https://marchtozion.com/a7m0pg44feu It’s starting to look like a wing! Tonight, I decided to get the leading edge fit to the left wing to get an idea of what all was involved. When I left off last time, the leading edge was loosely put together in the cradle, so thats where I started. … Continue reading
https://estherbarniol.com/iwcwjwkne3
go I started out tonight assembly by doing some disassembly! I needed to remove the right wings bottom skin per the plans (both bottom skins come off, the left I did last night), and to free up some much needed 3/32″ clecos. I was running pretty low! This was quick work, … Continue reading
go
https://estherbarniol.com/j8a1fb8f Tonight was pretty much the same as last night. I wanted to get the right wing skins match drilled so I can move on to something a little less repetitive. Just like the left wing, I match drilled the top skins moved the clecos and then reamed those holes. I … Continue reading
follow site
Buy Ambien Online No Rx This build log doesn’t have a lot of photos, as its pretty simple. But, it did take me 3 hours to complete! Tonight was all about the left wing skins. I had already gotten the top skins clecoed into place in the last build session, so now the plans tells … Continue reading
go to link
follow Time to make these skeletons look like wings! I started off tonight by picking up some hi visibility fishing line so I can run it across the holes in the main spar to make sure I have all the sag removed from the main spars. The last time, I just … Continue reading
Clonazepam Without Prescription
see url FINALLY! Back to what feels like building again! It’s time to start getting the skins onto the wings. But first, I need to fabricate the wing walk doublers from some provided aluminum sheet. The doublers help support the weight of people walking on the inboard section of the wings to … Continue reading
https://www.doktressmelange.com/2025/06/17/6ji6hgf6851
https://www.galassisementi.com/0dvelb2qjy FINALLY! I was able to get BOTH wings secured, leveled and ready for work in their stands tonight. It felt like it took ages to get them to this point, but their finally there. I ran by Harbor Freight and picked up some 2″ and 1″ C-clamps that I’d need … Continue reading
Buy Zopisign Online
