https://jpdepc.org/trade-info/ LOTS of work done in this session! I had to capture it in two time lapse videos, Here is the first video: The second covers the last bits, found below. I started the session by dry fitting the outer rib and then trimming the last little bits of excess on … Continue reading
Buy Generic Xanax
https://jpdepc.org/vision-mission/ Good progress tonight! I wrapped up a few miscellaneous things that needed to be done before riveting the inboard outer rib. Here is the time lapse: The first thing I did was to test fit all the accessories and fittings on the inner rib to make sure I had everything … Continue reading
go
Order Ambien Without Prescription The goal for tonight was to get the outboard rib sealed and riveted. I started out with a bit of miscellaneous work first though. I did capture another time lapse, and heres that video: I fixed up the fuel return line, and cut it to the right length, and then … Continue reading
https://thermocomfort.ca/toronto/
Buy Tramadol 100 Mg Online Got a lot done tonight! I finished up the larger riveting job on these inner ribs. I had three left from the last session, so I finished those last three up tonight. Heres the timelapse: My tools were already ready to go from the last session, so I jumped right … Continue reading
source link
https://theyoopergirl.com/2016/12/batterway-corn-muffins/ This is a simple update. I got two of the inner ribs riveted in place in this short session. I am coming up on the end of a 48 hour fast, and was a bit tuckered out, but wanted to get a little work done, so I decided to get … Continue reading
https://zorangepharmacy.com/pharmacy-generic-list
follow link After a short break from the previous build session today, I came back down to get the inner ribs sealed and cleco’ed in the left tank. This will set me pretty good to do some riveting on them tomorrow and Monday. I would love to have this left tank ready … Continue reading
https://heural.com/en/about-us/https://coralgablesyachts.com/service-management/ The right tank was left pressurized for about 3 days, and the balloon stayed inflated! There is no loss of air so I’m proud to say its leak free. Now its time to start working on the left tank. I collected all my parts, and then scuffed all the surfaces … Continue reading
see url
follow url The right tank has had a solid 3-4 days to cure. I took my little family on a short trip up to the mountains of Pigeon Forge for a min-vacation, and the right tank had plenty of time to sit and cure. So, I decided to give it a final … Continue reading
https://deanstextiles.com/hotel-supplies/
Purchase Tramadol Without Prescription Time to seal up the right tank! My goal tonight was to get this right tank completed and curing so I can do a final leak test on it. I underestimated how much work the baffle would be to be honest. You can’t really stop mid-way once you start on … Continue reading
Xanax Online Without A Prescription Short post, but I started the initial leak test on the right tank! I am doing the water test method without the baffle to test for any gross leaks around the rib rivets and outboard ribs before I put the baffle on. This will let me add sealant on any … Continue reading