https://www.psychiccowgirl.com/e8ioxjc Holy crap…its been a LONG time since I did any real work on the RV-7. Like nearly 7 months. Life’s been a bit busy, I bought a 1973 Cessna Cardinal 177RG and have been flying the wings off of it, and that has taken up some time on the build, in addition to work, and family. But, with the daylight hours dwindling, and flying weather getting sparse, its back to building!
https://mhco.ca/piy83to7see url Anyways, the last place I left off, I had to finish up Alodining some wing ribs, and then get my wings in their stands. I ended up going down to Aircraft Spruce a few months back (In the Cardinal of course!!) to pick up some more Alumaprep and Alodine. So I mixed it up tonight. Here is what I am using for the mix ratios:
https://reggaeportugal.com/z0438kmidhttps://etxflooring.com/2025/04/9d42aukby Alumaprep bath:
follow 1 Gallon of Alumaprep 33 concentrate mixed with 3 gallons of distilled water. Makes 4 gallons.
https://www.anonpr.net/sjdpo0vs6Buy Klonopin Generic Rinse the parts off to get rid of dust and grime. Scuff with maroon scotchbrite a little if needed during the rinse. Then soak for 7 to 10 minutes in the bath.
https://kanchisilksarees.com/svfnx68chttps://kanchisilksarees.com/jpsqzo0 Rinse parts in cold water to remove alumaprep.
click
https://www.anonpr.net/vb87wlg658 
here In the photo above, I had to use a rib and a glass jar to help hold down the other 6 ribs. The bubbles from the Alumaprep during its cleaning causes the aluminum to float!
https://www.psychiccowgirl.com/evazn26click Alodine bath:
https://www.villageofhudsonfalls.com/kund13y 1 Gallon of Concentrate Alodine mixed with 2 gallons of distilled water. Makes 3 gallons.
watchget link After the alumaprep bath and rinse, soak parts in Alodine bath for 7 to 10 minutes. Remove and rinse in cold water to remove excess alodine and then let air dry.
https://colvetmiranda.org/6tddawzbco
http://jannaorganic.co.uk/blog/2025/04/03/0vcb4c2k57 
https://townofosceola.com/5fvgggas8 And the obligatory photo that shows to the FSDO that I am actually the sucker building this plane…..apron,, gloves and all. I did remove my safety glasses for the photo though.
https://www.annarosamattei.com/?p=ae93vmt8follow link I was able to get all of the wing main ribs and wing end/nose ribs done and set out to air dry. It was good to get back down here and work on this project and start making progress again. I have decided to not spray primer on the ribs, except maybe the nose ribs. I think I will prime them since they will be fully enclosed and potential traps for moisture. Here’s how they ended up:
https://etxflooring.com/2025/04/5fimrsm3
https://lavozdelascostureras.com/1e020kqy1 
https://audiopronews.com/headlines/sijv81pu8 And here is the entire photo album from tonights work. Not many photos since it was just alodining. I think I will start working on the wing stands next.
https://audiopronews.com/headlines/v5ela4p51nm
https://semichaschaver.com/2025/04/03/ft8fy34
https://aalamsalon.com/rxjsvevsource link Google Photos Link: https://photos.app.goo.gl/e5yTndwHvwCXRT6L9 https://www.psychiccowgirl.com/3whoxffq Hours Worked: 2
Cheapest Place To Order Tramadol Online
follow site I was wondering where you went!
https://semichaschaver.com/2025/04/03/rg7mjrihttps://kirkmanandjourdain.com/518x63k59hx Yeah, finally getting back at it! Stayed pretty busy this summer and didn’t have much free time to spend unfortunately. But, with the short days, I am getting back down in the shop to get some work down on the RV-7. 🙂
go site