Fitting the Left Leading Edge

source url It’s starting to look like a wing! Tonight, I decided to get the leading edge fit to the left wing to get an idea of what all was involved.  When I left off last time, the leading edge was loosely put together in the cradle, so thats where I started.  … Continue reading https://actambulette.com/cgibin/pywytuq/

https://sandiegonewsdesk.com/sand/rajopyfu/

Assembling the Left Leading edge and Stall Warner

go I started out tonight assembly by doing some disassembly! I needed to remove the right wings bottom skin per the plans (both bottom skins come off, the left I did last night), and to free up some much needed 3/32″ clecos. I was running pretty low!  This was quick work, … Continue reading

see

Finishing the Rudder

https://www.leicesterstartups.com/pics1/qupyduby/ While Tammy and Acacia were taking a nap, I decided to sneak off to the shop and get some work done on the airplane.  Since the trailing edge of the rudder was completed a few days ago, its time to finish it up, and that means bending the leading edge … Continue reading

enter

Bending the Left Elevator Leading Edge

click After getting the right elevator bent,  it was time to move on the left.  This process is pretty much identical to the right elevator, so I will leave out all the details.  I did it exactly this one the same way as I did the right.  First up is to break … Continue reading

enter site